The 39-year-old from Barnsley sustained serious crush injuries including a fractured sternum and vertebrae in the incident at a former block works in Shawell, Lutterworth, Leicestershire, on 11 March 2013.
His employer HCL Equipment Contracts Limited was today (21 March) prosecuted today by the Health and Safety Executive (HSE) after an investigation identified serious flaws with the dismantling and removal of steelwork which had supported a large aggregate mixer.
Leicester Magistrates' Court heard the injured man and a colleague used ladders to access the top of the steelwork which was seven metres high.
-- Advertisement --
Both men wore harnesses and lanyards, which were the incorrect type, and used propane gas cutting equipment to cut the steelwork into pieces, then dropping them through a gap in the centre of the frame into a designated dropping area.
After clearing various parts of the steelwork, the men began to cut through a standing conveyor, with the intention of weakening it so it would fall onto the platform so they could continue the dismantling.
The HSE investigation found that the injured man was finishing a cut made by a colleague when the conveyor began to descend. He was unable to get out of the way of the falling frame, which weighed 380kg, and it struck him.
HSE found that no safe escape route was planned, resulting in the incident. The incident could have been prevented with better planning, management and training.
He suffered a fractured sternum, two broken vertebrae, eight fractured ribs, broken teeth and required 58 stitches in a head wound.
HCL Equipment Contracts Limited of Cotes Park Industrial Estate, Somercotes, Derbyshire, was fined £10,000 and ordered to pay £491 in costs after pleading guilty to breaching Section 2(1) of the Health and Safety at Work etc Act 1974.
(CD/MH)
