Lifting Technology Ltd

At TRANSLYFT, we want to fully understand the lifting needs you have in your business before we begin to find a solution. We know that each lift is unique, each company has its work processes and each station it's special functionalities. This means we often end up developing a specially designed solution of lifting equipment and work stations.

At TRANSLYFT, we are aware that the solutions we create create impact and value for our customers. Whether you buy a lifting table from our standard program or we design a solution, you can be sure that we always deliver a high quality product.

• We participate in all aspects of the process from consulting and design to product development and production.
• Our employees have expert knowledge about the industry, products and safety.
• All our products are Danish produced and developed by Danish engineers.
• Our products are based on proven technology that increases efficiency and increases health and safety.
• Our products can be customized and designed to fit your needs and work processes.

History
The production of TRANSLYFT lifting tables was established in the 1960s. The factory is located in North Jutland and is Denmark's largest developer and manufacturer of hydraulic lifting tables.

We work closely with our customers, from design to the finished solution, to make sure that you get the most optimal solution for your needs.

Consultancy
We are eager to find the right solution for your needs. Dialogue and expectation are key words when we advise on critical processes and possible flow optimizations. We advise throughout the process from consulting and design to product development and finally production.

Thanks to our partnership philosophy we have a strong supply chain and an extensive network of customer focused dealers and agents who are able to advise on how to find – not only the right products but also – the right solutions.

Insights - From Lifting The Roof To Lifting The Goods
A 1st tier automotive supply company was looking for an alternative to taking the roof and side off their building when they needed to change their machines. Our solution took care of this and furthermore provided them with a new internal goods lift mounted at the outside of the building.

• The CHALLENGE - How Do You Change Machines On The First Floor?
  One of the largest manufacturers of dash board instruments for the automotive industry in England – which is a company with a constant development of new products as well – often needed to change or replace machines.
  
  Every summer the factory was therefore closed down to allow the machines to be changed. And often they had to remove the roof of the building hire a crane to change the machines in the first-floor production area.


• The SOLUTION - A Twin Mast Lifting Table
  Mounted on the outside of the building TRANSLYFT identified an area outside the factory building, where it was possible to place a lift and open two access points – one on the ground floor and one on the first floor. A twin mast lifting table was then specifically designed within its own self-supporting shaft.
  
  At ground level there is a “through lift” entry/exit, making it possible to enter the lift from outside the building as well as from the inside. A full height lift car with interlocked car gates and external interlocked shutter gates completed the installation.


• The RESULTS - Easy Access and Improved Efficiency
  Not just for changing machines The lift has enabled the company to change their machines without having to lift off the roof, and in addition it has increased the capacity for lifting products from the existing 1 ton payload to 3 ton.

For more information, please Contact Us!