Pattern Imprinted Concrete Sealer - Gloss (25Ltr)
Multicrete Imprinted Concrete Sealer is a high quality acrylic solvent based clear sealer, designed to enhance and protect inprinted concrete area's by repelling water, dirt, oil and fuel.

Benefits:

• Ready for use no dilution required
• Surface dry in 1-2 hours
• High Solids
• Enhances imprinted concrete drives and patio's with no need for colouring

Coverage:

• 2-4 square meters per litre depending on the substrate, porosity of surface and application method. Some porous or neglected surfaces may require more than a single coat.

Application:

• For new surfaces - leave up to 7 days after new concrete is laid. Ensure the surface is clean and dry.
• For old surfaces - Fully clean off with power wash. Allow to thoroughly dry prior to application.
• Can be applied by course droplet low level, chemical resistant sprayer, soft bristle brush or roller.
• Avoid excess pooling and over coating.

Limitations:

• Do not apply when ground temperatures are below 5 degrees
• Do not apply to damp or wet surfaces
• Do not apply when rain is imminent or if efflorescence is present
• Do not walk on treated area till dry
• Do not park vehicles on treated area for 24-48 hrs
• Do not use on clay surfaces
• Inclusion of additives such as colour tints, pigments and anti-slip agents may affect final finish